Industry News
What is the use of the two contacts of the normally open and normally closed button switch?
Views : 13587
Author : HBAN PUSH BUTTON SWITCH
Update time : 2022-03-18 09:00:32
It is used when the button is self-locking, and the emergency stop is generally normally closed. There is no difference between NO1, NC1, and NO2 and NC2.
Normally closed contacts are used to close the circuit when you press it down.
Under normal circumstances, there will be a maintenance relay in this circuit to keep the circuit connected. That way when you release the button, the loop remains energized through that hold relay, allowing the system to function properly.
Until a termination signal such as a key off or an emergency stop arrives.
Related News
Read More >>
How to Choose the Right Push Button Switch for Panel Thickness | HBAN Push button
Jun .23.2026
Choosing the correct push button switch requires matching thread length to panel thickness. This guide explains how to measure, calculate, and select the right model to prevent installation problems and ensure secure mounting.
How to Choose IP65, IP67 & IP69K？| HBAN Push button
Jun .15.2026
This article outlines the fundamentals of the IP rating system and analyzes how dust and water protection levels directly affect the reliability, safety, and service life of push button switches in industrial environments.
Industrial Push Button IEC 60947-5-1 vs IEC 60947-5-5 | HBAN Push button
May .21.2026
Industrial push button IEC 60947-5-1 compliant devices are designed for reliable operation in industrial control circuits. They meet international standards for rated voltage, current, AC-15 and DC-13 utilization categories, and mechanical endurance. Wide
What Is a Laser Engraved Push Button Switch? | HBAN Push button
May .09.2026
Custom laser engraved stainless steel push button switches offer permanent, wear-resistant logo marking for industrial applications. Available in 304/316 stainless steel and anodized aluminum, these waterproof push button switches support illuminated and
